Welcome to B-S-R-ENGINEERING'S Revolutionary Fire Starting Solution! Our engineered Fire-Starting Method makes lighting a fire in your Wood Burning Stove or Fireplace a breeze!

Our solution is the fast, and efficient way to start Fire's!

In short it is the perfect way to start a Fire!

Our innovative approach to Fire Starting is perfect for anyone who enjoys the warmth and ambiance of a real wood fire but wants to skip the hassle and frustration of traditional Fire-Starting Methods.

HOW TO DO IT!"

How you do it using a Woodburning Stove is you start with three (2) large pieces of Firewood placing two (2) of them side by side running Front to Back and about 2" apart, (Note: you can also place a Small Piece of Cardboard underneath them at the front!)

Then fill the gap between the two pieces of Firewood with small pieces of Kindling Firewood about 6" long!

Then cap that with a third (3) piece of Firewood creating a tunnel! If you have room, you can cap them with two pieces of smaller Firewood and run them side to side! (Note: If the pieces of Firewood don't fit tightly together at the top, That's Good!)

Now use your spray bottle of Kerosene to lightly Moisten the Kindling Firewood, and then light on Fire! (Note: If you are lighting an Air Tight Stove make sure to Leave The Door Partially Open For Good Air Flow till the Fire gets going!)

If you are not using a Woodburning Stove, just adapt this method to your situation!

"WHY IT WORKS SO WELL!"

The reason it works so well is that you are concentrating the HEAT in a smaller area which in turn causes the wood to off gas it's FUEL faster and as long as you make sure that it has plenty of AIR (Oxygen) you will have a FIRE that continues to burn till it has consumed all of your wood! Want it to keep burning, just keep adding wood!

For there to be Fire you need to have Heat, Fuel, and Air (Oxygen) in the right amounts!

Even if the Woodburning Stove, Fireplace, or surrounding area is Very Cold, This Works GREAT!!

This is a Spray Bottle of Kerosene! This alone will make starting your fires MUCH EASIER!

Just be careful not to spray it on "HOT COALS" or it will almost EXPLOAD when you set fire to it!

There is a 1/2" sheet of OXB at the top. Old OXB scraps are "GREAT FIRESTARTERS!" It would have worked better had I spread the main pieces apart more allowing the kindling to fall to the bottom, but this did work! 

This is the "Ideal Set Up!" 3 Pieces of Firewood about 10" long with 6"to 10" Kindling having plenty of air at the top! A little bit of kerosene sprayed on the kindling, and a match to start it all burning! ... Thats it! ... You've Started Your Fire! ... It's That Easy!